Honda Fit: Body Interior

See also:

Pilot Bearing Replacement
Remove the crankshaft pilot bearing (A) using the remover weight (B), and the 15 mm bearing remover shaft set (C). Install a new pilot bearing (A) into the crankshaft using th ...

Clutch Wave-Plate Phase Difference Inspection (A/T)
Place the clutch wave-plate (A) on a surface plate, and set a dial indicator (B) on the wave-plate. Find the bottom (C) of a phase difference of the wave-plate, zero the di ...

Drive Belt Auto-Tensioner Inspection
Turn the ignition switch to ON (II), and make sure to turn the A/C switch OFF, then turn the ignition switch to LOCK (0). Check the position of the auto-tensioner indicator (A). S ...