Honda Fit: Internal Combustion Powertrain Control

See also:

Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper: If either brush is shorter than the service limit, replace the brushes, go to step 20. If brush length ...

Drive Belt Inspection
Inspect the belt for cracks or damage. If the belt is cracked or damaged, replace it. Check that the position of the auto-tensioner indicator (A) is within the standard range ( ...

Rear Brake Hose Replacement
Raise and support the vehicle. Remove the rear wheel. Disconnect the brake hose (A) from the brake line (B) using a 10 mm flare-nut wrench (C). ...