Honda Fit: Powertrain

See also:

Servo Body Disassembly, Inspection, and Reassembly (A/T)
Clean all parts thoroughly in solvent, and dry them with compressed air. Blow out all passages. Inspect the servo body for scoring and damage. Check all valves for fre ...

Installation (Part -3)
Remove the vinyl tape from the connectors. Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox. ...

Fuse Locations
If any electrical devices are not working, turn the ignition switch to LOCK (0 and check to see if any applicable fuse is blown. Fuse locations are shown on the fuse box cover. Locate the fuse i ...