Honda Fit: Transmission/Transaxle

See also:

A/T Differential Backlash Inspection (A/T)
Install the driveshaft and intermediate shaft into the differential assembly, and place the axles on V-blocks   (A). Measure the backlash of the pinion gears (B) wit ...

Installation
Install ECT sensor 1 (A) with a new O-ring (B). Install the water bypass hose (C). Remove all of the old liquid gasket from the water outlet mating surfaces, the bolts ...

Brake Hose Replacement
notice Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water. NOTE: Bef ...