Honda Fit: Seat Position Sensors

See also:

Installation (Part -3)
Remove the vinyl tape from the connectors. Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox. ...

Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then measure the countershaft at points A, B, and C. If any part of the countershaft is less than the service limit, replace ...

Clutch Disc Inspection and Removal
Remove the clutch disc (A), the remover handle (B), and the clutch alignment shaft (C). Inspect the lining of the clutch disc for signs of slipping or oil. If the clutch di ...