Clutch Disc Inspection and Removal
Remove the clutch disc (A), the remover handle (B), and the clutch
alignment shaft (C).
Inspect the lining of the clutch disc for signs of slipping or oil. If
the clutch di ...
M/T Differential Backlash Inspection (M/T)
Place the differential assembly on V-blocks (A), and install the right
driveshaft (B) and the left driveshaft (C).
Measure the backlash of both pinion gears (D) with a dial in ...
Immobilizer System Description
The vehicle is equipped with a Type VII immobilizer system that disables the
vehicle unless a programmed ignition key is used.
This system consists of a transponder combined with a keyless transmit ...