Insert the camshaft (A). Apply new engine oil to the journals and the cam lobes.

Install the CMP pulse plate.
Install the CMP sensor.
Install the rocker arm assembly.
Install the camshaft sprocket.
Maintenance
This chapter discusses basic maintenance. ...
A/T Differential Carrier Bearing Preload Inspection (A/T)
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 72 x 75 mm 07746-0010600
Preload Inspection Tool 07HAJ-PK40201
NOTE: If the transmission housing, to ...
Removal
Raise and support the vehicle.
Remove the rear wheel.
Remove the wire guide grommet (A) from both sides of the axle beam.
@font-face ...