Honda Fit: Driving
This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions.
It also includes important information on parking your vehicle, the braking system, and the tire pressure monitoring system (TPMS) .
- Driving Guidelines
- Preparing to Drive
- Starting the Engine
- Manual Transmission
- Automatic Transmission
- Driving with the Paddle Shifters (Sport only)
- Parking
- Braking System
- Anti-lock Brakes (ABS)
- Tire Pressure Monitoring System (TPMS)
- Towing a Trailer
- Towing Your Vehicle Behind a Motorhome
See also:
Installation
Install the damper rubber mount (A) onto the damper unit. Position the
damper assembly (B) between the body and the axle beam.
NOTE: Be careful not to damage the body.
...
Secondary Shaft Disassembly, Inspection, and Reassembly (A/T)
Inspect the thrust needle bearings and the needle bearings for galling
and rough movement.
Inspect the splines for excessive wear and damage.
Check the shaft bearing s ...
Connecting Rod and Crankshaft End Play Inspection
Remove the oil pump.
Measure the connecting rod end play with a feeler gauge (A) between the
connecting rod (B) and the crankshaft (C).
Connecting Rod End Play
...
Categories
