Inspection
Install the nut on the damper shaft end, and set the socket wrench and
T-handle on the nut.
Compress the damper assembly by hand, and check for smooth operation
through a full ...
Installation (Part -3)
Remove the vinyl tape from the connectors.
Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox.
...
Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver
handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B).
@fo ...