Your vehicle is equipped with a removable antenna at the rear of the roof.
NOTICE
Before using a “drive-through” car wash, remove the antenna by unscrewing it by hand. This prevents the antenna from being damaged by the car wash brushes.
A/T Housing Idler Gear Shaft Removal and Installation (A/T)
Remove the snap ring (A), the cotter retainer (B), and the cotters (C)
from the idler gear shaft (D), then remove the idler gear shaft. Do not
distort the snap ring.
Check ...
ATF Cooler Hose Replacement (A/T)
Drain the automatic transmission fluid (ATF).
Install the ATF cooler hoses over the ATF cooler lines, and secure the
hoses with the clips in the details (A), (B), (C), and (D) ...
Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver
handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B).
@fo ...