Honda Fit: Cooling
- A/C Refrigerant Oil Replacement (With A/C)
- A/C Refrigerant Recovery (With A/C)
- A/C System Charging (With A/C)
- A/C System Evacuation (With A/C)
- A/C System Inspection (With A/C)
- Evaporator Expansion Valve Replacement (With A/C)
- Evaporator Expansion Valve Replacement (With A/C)
- Breather Line and Suction Line Inspection (Page-1)
- Breather Line and Suction Line Inspection (Page-2)
- Receiver/Dryer Desiccant Replacement (With A/C)
See also:
System/Device Information
INFO button
► System/Device Information
View database, software, device, and vehicle identification information.
You will need this information when ordering a
map update. ...
Air Cleaner Removal/Installation
Disconnect the MAF sensor/IAT sensor connector(A), then remove the air
cleaner cover (B) and the air cleaner element (C).
NOTE: Be careful not to damage the MAF sensor/IAT sensor on the air ...
Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Categories
© 2026 Copyright www.hfitinfo.com