Remove the mirror holder.
From the mirror holder opening, release the tabs (A) of the mirror housing cover (B).
Release the hooks (C, D), then remove the mirror housing cover.
Install the mirror housing cover in the reverse order of removal.
Mainshaft Thrust Clearance Adjustment (M/T)
Special Tools Required
Mainshaft Base 07GAJ-PG20130
Collar 07GAJ-PG20120
Mainshaft Holder 07GAJ-PG20110
Remove the 72 mm shim (A) and oil guide plate M from the transmission
housing ...
CKP Sensor Replacement
Raise the vehicle on a lift.
NOTE: Make sure the vehicle is level, because engine oil will drip out
when you remove the sensor.
Loosen the bolt (A). Remove the bolt (B) and ...
Rear License Plate Light Bulb
When replacing, use the following bulb.
Rear License Plate Light: 5 W
1. Push the lens on the left and pull out the
lens and the socket attached to it.
2. Remove the license plate light assemb ...