Honda Fit: Map Menu

See also:

Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side. 2. Place a cloth on the edge of the lock tab. Push the lock tab up with a flat-tip screwdriver. 3. Slide the blade from the ...

Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B). @fo ...

Cylinder Head Installation
Clean the cylinder head and the engine block surface. Install a new coolant separator (A) in the engine block whenever the engine block is replaced. Install a new ...