
■ Reasons for the indicator to come on
Comes on when the battery is not being charged.
■ What to do when the indicator comes on
Turn off the heating and cooling* system, rear defogger, and other electrical systems, and immediately contact a dealer for repairs.
If you need to stop temporarily, do not turn off the engine. Restarting the engine may rapidly discharge the battery.
Mainshaft Bearing and Oil Seal Replacement (M/T)
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 37 x 40 mm 07746-0010200
Bearing Driver Attachment, 52 x 55 mm 07746-0010400
Adjustable Bearing Puller, ...
Reverse Shift Fork Clearance Inspection (M/T)
Measure the clearance between the reverse idler gear (A) and the reverse
shift fork (B) with a feeler gauge (C). If the clearance is more than the
service limit, go to step 2.
...
Connecting Rod Bolt Inspection
Measure the diameter of each connecting rod bolt at point A and point B
with a micrometer.
Calculate the difference in diameter between point A and point B.
Point AпјЌPoi ...