EPS Control Unit Removal/Installation
Do the battery terminal disconnection procedure.
Remove the under-dash fuse/relay box.
Disconnect EPS control unit connector A (11P) and connector B (16P) by
pus ...
Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then
measure the countershaft at points A, B, and C. If any part of the
countershaft is less than the service limit, replace ...
Interior Lights
Ceiling Light
The ceiling light has a three-position switch; ON, Door Activated, and OFF. In
the Door Activated (center) position, the light comes on when you:
• Open any door.
• Unlock the ...