Honda Fit manuals

Honda Fit: Under-Cowl Panel Replacement

NOTE: Take care not to scratch the body.

  1. Remove these items:

    • Windshield wiper arms

    • Cowl cover

  1. Remove the bolts, then remove the under-cowl panel (A).

  2. 6 x 1.0 mm9.8 Nح(1.0 kgfح, 7.2 lbfئt)A
  3. Install the under-cowl panel in the reverse order of removal.

See also:

Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper: If either brush is shorter than the service limit, replace the brushes, go to step 20. If brush length ...

VSA Off Switch Test/Replacement
NOTE: If the low tire pressure indicator turns ON, the VSA cannot be turned OFF. Check the tire pressure first. Turn the ignition switch to LOCK (0). Remove the driver's da ...

Secondary HO2S Replacement
Special Tools Required O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available Disconnect the secondary HO2S connector (A). Raise the vehicle on a lift. ...

© 2026 Copyright www.hfitinfo.com