Honda Fit: Changing Your Destination
There are four methods you can use to specify a new destination during route guidance.
►Say
►Say
► Selecting an icon on the map
Scroll the map to position the cursor over
a place/landmark icon or a new area on
the map. Press the Enter button twice.
►Entering a new destination
Press the DEST button. Select DEST
Menu1/2 and enter a new destination. Alternator Reassembly M/T Differential Backlash Inspection (M/T) A/T Housing Reverse Idler Gear Installation (A/T)
“Find Nearest…”
Searches for the nearest place/landmark
on the map screen (e.g., 
“Find
nearest gas station”).
“Go Home”
Routes to your home address.See also:
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Place the differential assembly on V-blocks (A), and install the right
driveshaft (B) and the left driveshaft (C).
Measure the backlash of both pinion gears (D) with a dial in ...
Lightly coat the reverse idler gear shaft (A), the needle bearing (B),
and new O-rings (C) with lithium grease.
Assemble the new O-rings and the needle bearing on the reverse ...
Categories
