Honda Fit: HVAC

See also:

Flywheel Inspection
Remove the ring gear holder. Inspect the ring gear teeth for wear and damage. Inspect the clutch disc mating surface on the flywheel for wear, cracks, and burning. ...

A/T Differential Backlash Inspection (A/T)
Install the driveshaft and intermediate shaft into the differential assembly, and place the axles on V-blocks   (A). Measure the backlash of the pinion gears (B) wit ...

Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is excessive play or noise, replace the release bearing. NOTE: The release bearing is packed with grease. Do not ...