Honda Fit: Fuel Tank Draining
-
Remove the fuel tank unit.
-
Using a hand pump, a hose, and a container suitable for fuel, draw the fuel from the fuel tank.
-
Reinstall the fuel tank unit.
See also:
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...
Connecting Rod Bolt Inspection
Measure the diameter of each connecting rod bolt at point A and point B
with a micrometer.
Calculate the difference in diameter between point A and point B.
Point AпјЌPoi ...
A/T Housing Reverse Idler Gear Installation (A/T)
Lightly coat the reverse idler gear shaft (A), the needle bearing (B),
and new O-rings (C) with lithium grease.
Assemble the new O-rings and the needle bearing on the reverse ...
Categories
