Rear Seat Leg Guide Replacement
Push the leg guide cover (A) to release the hook (B), then pull out the
cover from the attaching plate (C) and the holder (D) of the leg guide (E).
@font-fa ...
Installation (Part -1)
Before installing the steering gearbox, make sure that no grease is on
the mating surface of the steering gearbox and the front subframe. To
prevent the gearbox mounting bolts from looseni ...
Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the
joint and the splined section are clean.
Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact
ar ...