Honda Fit: Body Exterior

See also:

Rectifier Test
Check for continuity in each direction, between the B terminal and P terminals, and between the E terminal and P terminals of each diode pair. All diodes should have continuity in only one ...

Mainshaft Assembly Clearance Inspection (M/T)
NOTE: If replacement is required, always replace the synchro sleeve and the synchro hub as a set. Support the bearing inner race with an appropriate size socket (A), and push down on the m ...

Installation
Install the damper rubber mount (A) onto the damper unit. Position the damper assembly (B) between the body and the axle beam. NOTE: Be careful not to damage the body. ...