Honda Fit manuals

Honda Fit: Tailgate Dynamic Damper Replacement

NOTE:

  1. Remove the tailgate lower trim panal.

  1. Remove the bolts, then remove the tailgate dynamic damper (A) from the tailgate.

  2. Fastener Locations? : Bolt, 2A6 x 1.0 mm9.3 Nح (0.95 kgfح, 6.9 lbfئt)
  1. Install the tailgate dynamic damper in the reverse order of removal.

See also:

Clutch Interlock Switch Replacement (M/T)
M/T model Disconnect the 2P connector (A) from the clutch interlock switch. Loosen the locknut (B), then remove the clutch interlock switch (C). Install the clutch int ...

Engine Coolant
Adding Engine Coolant If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. Always use Honda Lo ...

Secondary HO2S Replacement
Special Tools Required O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available Disconnect the secondary HO2S connector (A). Raise the vehicle on a lift. ...

© 2021 Copyright www.hfitinfo.com