Honda Fit: Doors and Enclosures

See also:

Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off. 2. Pivot up the bottom end of the wiper blade until it comes off from the wiper arm. 3. Slide the wiper blade out from the end with the indent. NOTICE Avoid dro ...

Emissions Testing
Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘r ...

A/T Housing Reverse Idler Gear Installation (A/T)
Lightly coat the reverse idler gear shaft (A), the needle bearing (B), and new O-rings (C) with lithium grease. Assemble the new O-rings and the needle bearing on the reverse ...