Honda Fit: Doors

See also:

Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then measure the countershaft at points A, B, and C. If any part of the countershaft is less than the service limit, replace ...

Engine Block Drain Bolt/Sealing Bolt Installation
NOTE: When installing the drain bolt (A), always use a new washer. When installing the sealing bolt(s) (B), always use a new bolt(s) and washer(s) (C). ...

Opening the Hood
1. Park the vehicle on a level surface, and set the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard. ► The hood will pop up slightly. 3. Push ...