Flywheel Replacement
Install the ring gear holder.
Loosen the flywheel mounting bolts in a crisscross pattern in several
steps. Remove the bolts, then remove the flywheel and the ring gear holder. ...
Front Seat-Back Cover/Pad Replacement (Part -1)
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call
888-424-6857
SRS components are located in this area.
Review the SRS c ...
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...