Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Security System
On Sport model
The security system helps to protect your vehicle and valuables from theft.
The horn sounds and a combination of headlights, position lights, side marker
lights and taillights flash ...
Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle’s electrical
system.
Always disconnect the negative (–) cable first, and reconnect it last. ...
Using the Touch Screen
Touch a character or icon on the screen to select it.
►Select Delete to remove the last entered character.
►Select Shift to display accented and upper/lower case characters.
►Sele ...
Categories
