Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Door Locks
Each door has a lock tab on the top of the door. Push in the tab to lock the
door, and pull it out to unlock.
On Canadian DX model
To lock the passenger’s door when getting out of the vehicle, ...
Emblem/Sticker Replacement
NOTE: When removing the emblems/stickers, take care not to scratch the body.
To remove the front ёH'' emblem,
remove the front grille.
To remove the rear ёH'' em ...
Rear Door Latch Replacement
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the door or related parts.
Raise the glass fully.
Remove the door panel.
Disco ...
Categories
