Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Display and Volume Settings
INFO button
► Setup
Use the Main Setup screen to adjust the display and volume.
Select or
to adjust the desired
item.
The following items are available:
• Brightness: Adjusts the s ...
A/T Countershaft Reverse Selector Hub Installation (A/T)
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Install 1st gear, 2nd gear, 3rd gear, the 33.2 x 40 x 26 mm
collar, the 29 mm cotters, and the 33 x ...
Rear Bumper Removal/Installation
NOTE:
Put on gloves to protect your hands.
Have an assistant help you when removing and installing the rear bumper.
Take care not to scratch the rear bumper or the body.
...
Categories
