Honda Fit manuals

Honda Fit: Interior Trim Removal/Installation - Cargo Area

Second generation (2007-2025) / Honda Fit 2007-2025 Repair Manual / Body / Body Interior / Interior Trim Removal/Installation - Cargo Area

Special Tools Required

NOTE:

  1. Release the hooks (A), then pull up the cargo floor (B) and remove it.

  2. Without spare tire

    ABAC

With spare tire

ABACCB???
  1. Release the bungee (C).

  1. Remove the tailgate weatherstrip, as needed.

  1. With temporary repair kit (TRK): Remove the cargo floor box (A)

  2. A
  1. Remove the rear trim panel (A).

    1. Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).

    1. Detach the clips by pulling the panel up.

  2. Fastener Locations: Clip, 4(Gray)DBCACB
  1. Install the trim in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips, the hooks, and the tabs into place securely.

See also:

Edit Waypoint Search Area
INFO button ► Setup ►Other ►Routing & Guidance►Edit Waypoint Search Area “Edit” Select the distance from your highlighted route line (on either side of your rout ...

Information
This chapter includes your vehicle’s specifications, locations of identification numbers, and other information required by regulation. ...

Rear Door Panel Removal/Installation
Special Tools Required KTC Trim Tool Set SOJATP2014 Trim Pad Remover Snap-on A 177A or equivalent, commercially available *Available through the Honda Tool and Equipment Program; call 888-4 ...

© 2025 Copyright www.hfitinfo.com