Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Audio Screen Control
AUDIO button (in iPod® mode)
Control the audio screen through the navigation system.
Select a track.
Select the menu tab to change
songs in the track list.
The following items are ava ...
Steering Column Cover Removal/Installation
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the column cover.
Do not pry on the cover surface with any tools.
Release the tilt/telescope leve ...
Preparing to Drive
You should do the following checks and adjustments before you drive your vehicle.
1. Make sure all windows, mirrors, and outside lights are clean and unobstructed.
Remove frost, snow, or ice.
2. C ...
Categories
