Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Auto Door Locking/Unlocking
Your vehicle locks all doors and unlocks the driver’s door automatically when
a
certain condition is met.
You can turn off or change to another auto door
locking/unlocking setting using the mas ...
Pairing from Phone Setup
PHONE button
► Phone Setup
Use the Phone setup screen to pair an additional Bluetooth-compatible phone
if a
phone has been previously paired to the system.
1. Select Add/Select a Phone ...
Exploded View - Transmission Housing
NOTE: Place the clutch housing on two pieces of wood thick enough to keep the
mainshaft from hitting the workbench.
Remove the release bearing and the release fork.
Remo ...
Categories
