Special Tools Required
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
Put on gloves to protect your hands.
Take care not to bend or scratch the trim and panels.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
Release the bungee (C).
Remove the tailgate weatherstrip, as needed.
With temporary repair kit (TRK): Remove the cargo floor box (A)
Remove the rear trim panel (A).
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
Detach the clips by pulling the panel up.
Install the trim in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips, the hooks, and the tabs into place securely.
Selecting USB Mode
1. Connect the USB flash drive to the
USB adapter cable in the center
console.
2. Press the CD/AUX button until you
get to USB mode.
3. Select AUDIO/STREET until
AUDIO is highlighted in blue ...
Mirrors
Keep the inside and outside mirrors clean and adjusted for best visibility.
Be sure to adjust the mirrors before you start driving.
The inside mirror has day and night positions. The night positio ...
HFL Menus
Use HFL when the vehicle’s ignition is in the ACCESSORY (I) or ON (II)
position.
You can operate HFL by voice when on the PHONE screen. Below is the flow chart
showing available voice commands ...