Special Tools Required
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
Put on gloves to protect your hands.
Take care not to bend or scratch the trim and panels.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
Release the bungee (C).
Remove the tailgate weatherstrip, as needed.
With temporary repair kit (TRK): Remove the cargo floor box (A)
Remove the rear trim panel (A).
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
Detach the clips by pulling the panel up.
Install the trim in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips, the hooks, and the tabs into place securely.
Middle Front Floor Crossmember Replacement
Middle Front Floor Crossmember Torque
NOTE: Take care not to scratch the body.
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_Symbo ...
Using the Phonebook
PHONE button
► Phonebook
1. Select a name.
Select alphabetical tabs to
display the entries in the group.
2. Select a number.
3. Select Call to begin dialing.
Up to three icons ...
Precautions While Driving
NOTICE
Do not operate the shift lever while pressing the
accelerator pedal. You could damage the
transmission.
If the ignition switch is turned to ACCESSORY
or
LOCK while driving, the engine ...