Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Steering Rack Guide Removal/Installation
NOTE: During removal/installation, do not allow dust, dirt, or other foreign
materials to enter the steering gearbox.
Remove the steering gearbox.
Loosen the locknut (A), then ...
A/T System Description - Lock-Up System (A/T)
Lock-up SystemThe lock-up mechanism of the torque converter
clutch operates in all five gears in D, in 3rd gear in D3, and 3rd and 4th
gears in S with the automatic shift mode. The pressurize ...
Fog Lights*
When the low beam headlights are on, turn
the fog light switch on to use the fog lights.
When the fog lights are on, the indicator in the
instrument panel will be on. ...
Categories
