Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
During Route Guidance
During route guidance, route information is displayed on the map/guidance
screen.
Press the MAP/GUIDE button to display the guidance screen. ...
Tires
To safely operate your vehicle, your tires must be the proper type and size,
in good condition with adequate tread, and correctly inflated.
The following pages give more detailed information on how ...
A/C System Inspection (With A/C)
NOTE: For A/C system noise,
go to the A/C System Noise Check.
Before troubleshooting any problem with the air conditioning system, other than
noise, do the following:
Check that the HVAC ai ...
Categories
