Honda Fit: Towing a Trailer
Your vehicle is not designed to tow a trailer. Attempting to do so can void your warranties.
See also:
Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque
its locknut to 110 N·m (11.2 kgf·m, 81 lbf·ft).
Remove any grease or any oil from the ...
Clutch Pedal Position Switch Replacement (With Cruise Control (M/T))
Disconnect the 2P connector (A) from the clutch pedal position switch
(B).
@font-face{font-family:
"Honda_SymbolMarkeng"; ...
Mainshaft Assembly Clearance Inspection (M/T)
NOTE: If replacement is required, always replace the synchro sleeve and the
synchro hub as a set.
Support the bearing inner race with an appropriate size socket (A), and
push down on the m ...
Categories
