INFO button
► Setup ►Other
►Clock Adjustment►Clock Adjustment
Adjust the current time (hours and minutes).

1. Select
or
to adjust the value.
2. Select OK on the top right of the
screen.
A/F Sensor Replacement
Special Tools Required
O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available
Remove the cowl cover and the under-cowl panel.
Disconnect the A/F se ...
Wiper Arm Replacement
NOTE: Set the wiper arms to the auto-stop position before removal and
installation.
Windshield
NOTE: Always pull up the driver's side wiper blade first.
Remove the caps, the nuts, and t ...
Pressure Plate Inspection and Removal
Remove the transmission.
Check the evenness of the height of the diaphragm spring fingers using
the clutch alignment disc (A), clutch alignment shaft (B), remover handle
(C ...