Honda Fit manuals

Honda Fit: If the Brake System Indicator Comes On

■ Reasons for the indicator to come on


■ Reasons for the indicator to come on

• The brake fluid is low.

• There is a malfunction in the brake system.

■ What to do when the indicator comes on while driving


■ What to do when the indicator comes on while driving

Press the brake pedal lightly to check pedal pressure.

• If normal, check the brake fluid level the next time you stop.

• If abnormal, take immediate action. If necessary, downshift the transmission to slow the vehicle using engine braking

Have your vehicle repaired immediately.

It is dangerous to drive with low brake fluid. If there is no resistance from the brake pedal, stop immediately in a safe place. If necessary downshift the gears.

If the brake system indicator and ABS indicator come on simultaneously, the electronic brake distribution system is not working. This can result in vehicle instability under sudden braking.

Have your vehicle inspected by a dealer immediately.

See also:

Rear Seat Control Cable Replacement
NOTE: Take care not to tear or damage the seat covers. Put on gloves to protect your hands. Take care not to kink the cable. The left rear seat is shown, the right rear ...

Clutch Clearance Inspection (A/T)
Special Tools Required Clutch Compressor Attachment 07ZAE-PRP0100 Inspect the clutch piston, the discs, the plates, and the end-plate for wear and damage, and inspect the clutch wav ...

Shift Solenoid Valve Removal and Installation (A/T)
NOTE: Do not hold the solenoid valve connector to remove and install the solenoid valve. Be sure to hold the solenoid valve body. Remove the mounting bolts, then remove the solenoid valves by ...

© 2026 Copyright www.hfitinfo.com