The label attached to the driver’s doorjamb provides necessary tire and loading information.

The tire and loading information label attached to the driver’s doorjamb contains: 1 The number of people your vehicle can carry.
2 The total weight your vehicle can carry. Do not exceed this weight.
3 The original tire sizes for front, rear, and spare.
4 The proper cold tire pressure for front, rear, and spare.
FTP Sensor Replacement
Remove the EVAP canister.
Disconnect the FTP sensor connector (A).
Disconnect the hose (B), remove the retainer (C), and remove the FTP
sensor (D).
Ins ...
Regulator Valve Body Disassembly, Inspection, and Reassembly (A/T)
Clean all parts thoroughly in solvent, and dry them with compressed air.
Blow out all passages except the air check valve filter.
Inspect the regulator valve body for scoring and ...
Reverse Shift Fork Clearance Inspection (M/T)
Measure the clearance between the reverse idler gear (A) and the reverse
shift fork (B) with a feeler gauge (C). If the clearance is more than the
service limit, go to step 2.
...