Honda Fit manuals

Honda Fit: Maintenance MinderTM

If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the information display every time you turn the ignition switch to ON .


The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.

To Use Maintenance MinderTM

■Displaying the Engine Oil Life

1. Turn the ignition switch to ON .


1. Turn the ignition switch to ON 2. Press the  (select/reset) knob.


2. Press the repeatedly (select/reset) knob
repeatedly until the engine oil life appears on the information display.

The Maintenance Minder indicator ( )
) stays on in the instrument panel after the engine oil life becomes 0%. Have the indicated maintenance done by a dealer immediately.

Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

■Maintenance Minder Messages on the Information Display


■Maintenance Minder Messages on the Information Display

To switch the display, press the (select/reset) knob.
(select/reset) knob.

■Maintenance Service Items


■Maintenance Service Items


*1: If a message SERVICE does not appear more than 12 months after the


*1: If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year.

*2: Canadian A/T models only # : See information on maintenance and emissions warranty.

*3: If you drive in dusty conditions, replace the air cleaner element every


*3: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).

*4: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000 miles (24,000 km).

*5: If you tow a Fit behind a motorhome, the transmission fluid must be changed every 2 years or 30,000 miles (48,000 km), whichever comes first. (For A/T only)

• Independent of the Maintenance Minder information, replace the brake fluid every 3 years.

• Inspect idle speed every 160,000 miles (256,000 km).

• Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.

■Resetting the Display

Reset the engine oil life display if you have performed the maintenance service.

1. Turn the ignition switch to ON .


1. Turn the ignition switch to ON 2. Display the engine oil life by repeatedly.


2. Display the engine oil life by repeatedly pressing the 3. Press and hold the  knob for ten (select/reset) knob.


3. Press and hold the seconds knob for ten
seconds or more.

► The engine oil life indicator and the maintenance item codes blink.

4. Press the or more. knob for five seconds
or more.

► The displayed maintenance items disappear, and the engine oil life display returns to 100%.

NOTICE

Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.

See also:

Ball Joint Boot Inspection/Replacement
Special Tools Required Bearing Driver Attachment, 40 mm 07GAF-SE00200 Check the ball joint boot for weakness, damage, cracks, and grease leaks. NOTE: If the ball joint boot is ...

Low Oil Pressure Indicator
This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and ...

Using Voice Control
When you see in this manual, voice commands are available for that feature. ►Say the letter, number, or symbol (e.g., say “A”).  Use spelling assist (e.g., say “Alpha” ...

© 2024 Copyright www.hfitinfo.com