Wiper/Washer Switch Test/Replacement
Remove the steering column covers.
Disconnect the dashboard wire harness 8P connector (A) from the wiper/washer
switch (B).
@font-face{font-f ...
Flywheel Inspection
Remove the ring gear holder.
Inspect the ring gear teeth for wear and damage.
Inspect the clutch disc mating surface on the flywheel for wear, cracks,
and burning.
...
Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is
excessive play or noise, replace the release bearing.
NOTE: The release bearing is packed with grease. Do not ...