USB Adapter Cable
1. Unclip the USB connector and loosen the
adapter cable.
2. Install the iPod® dock connector or the USB
flash drive to the USB connector.
• Do not leave the iPod® or USB flash drive in the
...
Change Lever Clearance Inspection (M/T)
Measure the clearance between the change lever (A) and the select lever
(B) with a feeler gauge (C). If the clearance is more than the service
limit, go to step 2.
...
Accelerator Pedal Module Removal/Installation
Remove the driver's dashboard lower cover.
Disconnect the APP sensor connector (A).
Remove the accelerator pedal module (B).
NOTE:
The APP sensor ...