Installation
Hold the gearbox housing using a C-clamp (A) and wooden blocks (B) to a
workbench as shown. Do not clamp the cylinder part of the gearbox housing in
a vise.
...
Front Seat-Back Cover/Pad Replacement (Part - 3)
Driver's seat: Pull out the side airbag harness (A) through the harness
holes (B) in the seat-back pad (C) and the seat-back cover (D).
@font-face{font- ...
Introduction
Congratulations! Your selection of a 2008 Honda Fit was a wise investment.
It will give you years of driving pleasure.
One of the best ways to enhance the enjoyment of your new vehicle is to read
...