Honda Fit manuals

Honda Fit: Rear

See also:

Installation
Hold the gearbox housing using a C-clamp (A) and wooden blocks (B) to a workbench as shown. Do not clamp the cylinder part of the gearbox housing in a vise. ...

Power Mirror Actuator Replacement
Removal Remove these items: Mirror holder Power mirror Record the power mirror connector terminals location and the wire harness colors. ...

Inspection
Install the flange nut on the damper shaft end, and set the socket wrench and T-handle on the nut. Compress the damper assembly by hand, and check for smooth operation through ...

В© 2018 Copyright www.hfitinfo.com