Honda Fit: Personal Communications

See also:

Mainshaft Disassembly, Inspection, and Reassembly (A/T)
Inspect the thrust needle bearings and the needle bearings for galling and rough movement. Inspect the splines for excessive wear and damage. Check the shaft bearing s ...

Combination Light Switch Test/Replacement
Remove the steering column covers. Disconnect the 12P connector (A) from the combination light switch (B). @font-face{font-family: "Honda_Symb ...

Mainshaft Assembly Clearance Inspection (M/T)
NOTE: If replacement is required, always replace the synchro sleeve and the synchro hub as a set. Support the bearing inner race with an appropriate size socket (A), and push down on the m ...