INFO button
► Setup ►Other
►Clear All Speed Dial
Delete all registered speed dials stored in Bluetooth® HandsFreeLink®.

Select Yes.
You can also delete a speed dial individually.
Cylinder Head Inspection for Warpage
Remove the cylinder head.
Inspect the camshaft.
Check the cylinder head for warpage. Measure along the edges, and three
ways across the center:
If wa ...
Brake Light, Taillight, Back-Up Light and Rear Turn
Signal Light Bulbs
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove ...
Engine Compression Inspection
NOTE: After the inspection, you must reset the ECM/PCM. Otherwise, the
ECM/PCM will continue to stop the injectors from operating.
Allow the engine to reach operating temperature (fan comes o ...