Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Front Seat-Back Cover/Pad Replacement (Part - 3)
Driver's seat: Pull out the side airbag harness (A) through the harness
holes (B) in the seat-back pad (C) and the seat-back cover (D).
@font-face{font- ...
Playing Tracks in Folders
AUDIO button (in USB mode)
►Folder
Change the folder if the tracks are stored in a folder structure.
1. Select a folder.
► The system displays the track
list.
2. Select a tra ...
Steering Column Cover Removal/Installation
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the column cover.
Do not pry on the cover surface with any tools.
Release the tilt/telescope leve ...
Categories
