Honda Fit manuals

Honda Fit: Interior Trim Removal/Installation - Cargo Area

Second generation (2007-2025) / Honda Fit 2007-2025 Repair Manual / Body / Body Interior / Interior Trim Removal/Installation - Cargo Area

Special Tools Required

NOTE:

  1. Release the hooks (A), then pull up the cargo floor (B) and remove it.

  2. Without spare tire

    ABAC

With spare tire

ABACCB???
  1. Release the bungee (C).

  1. Remove the tailgate weatherstrip, as needed.

  1. With temporary repair kit (TRK): Remove the cargo floor box (A)

  2. A
  1. Remove the rear trim panel (A).

    1. Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).

    1. Detach the clips by pulling the panel up.

  2. Fastener Locations: Clip, 4(Gray)DBCACB
  1. Install the trim in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips, the hooks, and the tabs into place securely.

See also:

Wheel Bearing Replacement
Separate the hub (A) from the knuckle (B) using the hub dis/assembly tool and a hydraulic press. Hold the knuckle with the attachment (C) of the hydraulic press or equivalent tool. Be care ...

Routing & Guidance
INFO button ► Setup ►Other ►Routing & Guidance Choose various settings that determine the navigation system functionality during route guidance. Select an item. The fo ...

Front Passenger's Weight Sensor Replacement (Part-1)
Removal NOTE: . Removal of the front passenger's weight sensors must be done according to precautions and procedures. The front passenger's weight sensor are part of the ...

© 2025 Copyright www.hfitinfo.com