Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Keys and Locks
On Sport model
Your vehicle comes with the two ignition keys.
All models except Sport
You should have received a key number tag with your keys. You will need this
key number if you ever have ...
Removal (Part -2)
Remove the harness clamp (A) from its clamp bracket (B) located in front
of the left damper top.
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/st ...
A/T Clutch Pressure Control Solenoid Valve B and C Replacement (A/T)
Remove the air cleaner assembly.
Remove the breather hose (A) from its clamp (B), and remove the breather
hose clamp bracket (C).
Disconnect the connectors (A) ...
Categories
