Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Guidance Menu
MAP MENU (on map)
►Guidance Menu
Display the guidance points and freeway exits for your route, and set the
display
mode for the map and guidance screens.
Select an item.
The following ...
Changing the Engine Oil and Filter
Always change the oil and filter according to the maintenance messages shown
on the information display. The oil and filter collect contaminants that can damage
your engine if they are not removed ...
Brake Master Cylinder Inspection
Remove the master cylinder.
Inspect and note these items:
Before reassembling, check that all parts are free of dirt and other
foreign particles.
Do not t ...
Categories
